Frankenstrat Stripe Template Second4/27/2021
Ed just couldnt find a way to wire them all together, so the bridge PAF pickup remained wired directly to the volume pot. 1981 is also the first time the quarter appeared.The guitar I will be constructing will be a replica of the Frankenstrat, circa 1982.Eddie bought a Strat replacement body and a Strat replacement neck from Boogie Bodies, a guitar shop owned and operated by Wayne Charvel.The neck had a CBS-Style Fender Strat headstock, and a Birdseye maple neck, with maple fingerboard.
Eddie only liked the sound that a humbucker could give him, and he quickly determined that the body wasnt routed large enough to accommodate the Gibson PAF pickup he intended on installing. Therefore, He took a hammer and chisel and started chunking away at the bridge position rout until it fit the bigger pickup. ![]() Ed removed all the tone controls also, opting to instead wire the pickup directly to one volume pot. To finish the project, Ed found Schwinn bicycle paint in spray cans. He painted the body black, then wrapped masking tape randomly around the body and painted it white. Once he removed the masking tape, he was left with the famous white and black strat that can be seen on the cover of Van Halen I. Since Van Halen I had taken off into the stratosphere and Ed was quickly becoming the most popular guitarist in the world, copycats began to pop up. Ed noticed that everyone seemed to be painting their guitars white with black stripes, and even had to issue a cease and desist to a company that made guitars identical to the Frankenstrat and sold them to the unsuspecting populace. To keep people from copying him and his style, Ed took his Frankenstrat, by this time beat up, worn, with paint scratched off, and wrapped it again in more masking tape. He then sprayed a few coats of Schwinn red paint, giving us what we now know as the red, white, and black guitar striping. Ed putting a white pickguard on the guitar, as well as putting a second pickup in the guitar, a Mighty Mite single coil in phenolic red. Frankenstrat Stripe Template Second How To Wire ItUnfortunately, Ed didnt know how to wire it up, so it ended up being a decorative mod. Ed also added truck reflectors to the back of the guitar, which shone brightly during live shows. Floyd Rose developed a new type of bridge that enabled the style of deep, dive bomb whammys that Ed loved without the guitar getting whacked out of tune every time. The rare, early Floyd Rose bridge that Ed used did not have the fine tuners that we are accustomed to today. Ed also got rid of the full size white pickguard, opting instead to cover only the control cavity. He cut a small pickguard out of a black vinyl record, and covered the back with aluminum foil. Eds pickup in the guitar at this time was still a Gibson PAF, this time with white caps on it. The vinyl record was replaced by a proper pickguard, but in true EVH style, it was trimmed down to only cover the control cavity. A three-way switch was screwed into the middle pickup rout, but just like the neck Mighty Mite single coil, it ended up only being decorative. Ed just couldnt find a way to wire them all together, so the bridge PAF pickup remained wired directly to the volume pot.
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |